Snow temperature -3° to 0° C, Humidty 60% to 100% Briko-Maplus Perfluorinated Spray, 50ml. To be applied on top of fluorinated paraffin products for racing use in the presence of medium to very high humidity (60% to 100%). Apply by spraying at least 3 times to cover roughly 15cm of the base then immediately spread the wax in this area using a cork or felt, rubbing and pressing. Repeat these two steps covering the entire base. With very abrasive snow (ie. man-made) it is recommended to melt the wax by passing an iron over the base with a sheet of teflon between the iron sole plate and base (iron temperature 140 degrees C). Immediately roll the waxed base using the cork roller fitted on a drill (between 1000 and 2000 rpm) using light pressure. Wait at least 10 minutes for the wax to harden, free the base structure with a stiff manual or roto horsehair or nylon brush, then polish the base structure with a soft manual or soft roto horsehair or nylon brush
© 2000 - 2018 Innovation Inc.. All rights reserved.
Powered by X-Cart eCommerce solution