Previous image Next image
Zoom image

SWITCH CUT 2º+ 3º SIDE EDGE GUIDE, 7º SIDEWALL TRIMMER + 0º SCRAPER SHARPENER

In stock (1000 items available)
  • $119.00
Qty:  
Add a different product to compare
  • Weight
    0.5000 lbs
  • SKU
    SWITCHCUT

File guide, sidewall cutter and scraper sharpener, reimagined in a single tool. Take down just enough sidewall to expose more metal edge for filing, then simply rotate tool 180º to sharpen and hone the side edge at either 2° or 3°. 0° angle bar surface provides convenient fence to sharpen plexi scrapers. To switch between 2° and 3° simply detach angle bar from wear plate, rotate 180º then re-attach, no need for multiple fixed angle guides. Trash the expensive carbide cutters that tear away too much sidewall compromising structural integrity or chatter down the length of your ski or snowboard edge causing impossible to remove "washboard". The  angle bar perfectly positions a file to readily trim sidewall missing the metal edge typically set at 2° or 3°. Place the coarse side of a Tools4Boards Combi-Cut or panzer file (sold separately) on the outwardly facing 7° angle bar surface and draw the tool down the sidewall using light pressure. Multiple file teeth in contact with the sidewall prevent the file blade from digging in. Minimizing sidewall removal maintains necessary support for the metal edge and greatly extends ski or snowboard life. To switch from sidewall trimmer to plexi scraper sharpener, simply detach angle bar from wear plate, rotate 180º then re-attach so the 0° surface is outwardly facing. Place a sheet of 180 grit sandpaper (sold separately) on a flat surface underneath wear plate and slide plexi scraper back and forth using 0° surface as a fence.

 ·      We start with a .2" (4.5mm) thick surgical grade stainless steel wear plate for unprecedented durability.

 ·       Add modular 2°+3° and 0°+7°  angle bars precision milled from aircraft grade aluminum, sand blasted and anodized to 15 microns for military spec. accuracy.

 ·       Durable laser etched angle number markings. 

 ·       Wear plate cut-outs provide open areas for both sidewall debris and edge filings to fall away from base.

 ·       Disc positon indicators (+ symbols) on angle bars provide quick and easy alignment of new Tools4Boards Puck diamond discs maximizing disc cutting and polishing efficiency.

·       Wear plate screw ports allow 4°+ 5° angular bar (available but sold separately) to be mounted.

Compatible with all interchangeable Switch system components. Domesic and foreign patents filed and pending.

* Pre-order now, Available 12.1

 

Customers who viewed this product bought

Drop items here to shop
Product has been added to your cart