Not rated yet
:
from
to
Clear
Clear
MAPLUS GM BASE SOLID COLD
SKU: MFF0160
Package format
• Code MFF0160 - 50 gr
• Code MFF0170 - 250 gr
• Code MFF0180 - 1 Kg
For all types of snow
-22° / -8°C
30 / 80%
150°C
Fluor free solid base for competitive use. To be used for all types of snow, new and transformed, artificial and natural, with snow temperatures from -22°C. at -8°C. Air humidity from 30% to 80%. Hot application with waxing iron at 150°C. Together with the GM Gel Base, it is the ideal choice as a base on which to layer GM BOOST accelerators in powder or liquid form.
- Shipping infoWe deliver worldwide
- Payment methods
- Return PolicyWe accept returns
HOT APPLICATION WITH WAXING IRON
1. Allow the block of product to drip onto the base for 20 cm, placing it in contact with the base of the waxing iron set at the temperature indicated for each specific product and then immediately spread the wax with a regular back and forth movement (from tip to tail);
2.Repeat the operation for the entire insole and finally perform a continuous passage from tip to tail (approximately 4/5 cm per second for GM Base Cold and Med, approximately 3 cm per second for GM Base Hot);
3.(mix with a hardener) If the snow conditions require the use of a harder base, place some powdered ARTIC BASE on top of the newly hardened GM BASE (the higher the abrasion of the snow, the greater the quantity of powder will be) and with the waxing iron at 150°C perform a continuous passage from tip to tail at low speed (about 3 cm per second) perfectly melting the powder into the underlying solid paraffin.
4.Free the side of the ski and the lateral face of the edges from the solidified product with a well-sharpened plexyglass spatula;
5.Wait at least 15 minutes to allow the insole to cool and the product to solidify; then remove the excess of the solidified product with a well-sharpened spatula applying gentle pressure;
6.Free the base structure using a rigid steel manual brush;
7.Brush the insole with a manual or rotating rigid brass brush;
8.Brush the insole with a manual or rotating stiff horsehair brush;
9.Polish the insole with a manual or rotating soft nylon brush.
To replace this text with your store's actual shipping info, go to "Catalog -> Product tabs" and edit the Shipping info page.
This page is intended for your policy regarding returns and refunds.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.
Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.
To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.
